Discover the Best Bike Diesel Washing Service Near You

WHAT IS BIKE DIESEL WASHING?

Bike diesel washing is the traditional cleaning of a bike using diesel fuel to remove tough grease, dirt, and grime that have gathered on a bike, mainly the engine, chain, and other metallic parts. Diesel used as a degreaser dissolves even the smallest oil droplets that may precipitate due to time. This method is not recommended as it involves more environmental damage and also causes damage to rubber parts, paint, or coatings if not done carefully.

 TYPES OF BIKE DIESEL WASHING

1. Full Diesel Wash: Diesel is used for the entire washing of the bike. The focus would be on those places where grease and dirt seem to have accumulated in large quantities.

2. Diesel Wash for the Engine (Motorcycles): Intentional degreasing and cleaning of the engine, along with the exhaust, to remove the oil and grime build-up.

3. Diesel Chain Wash: Diesel pushes old grease and dirt out from the chain.

4. Diesel Drivetrain Wash: In this process, diesel is directly applied to clean out the drivetrain of the motorcycle; these include the gears, chains, and derailleurs.

5. Spot Diesel Wash: A targeted diesel wash used for cleaning particularly dirty or greasy areas without affecting the rest of the bike.

 COMMON PROBLEMS WITH BIKE DIESEL WASHING

1. Paint Damage: Diesel can strip away wax, polish, and even damage paint if left on too long or not rinsed off thoroughly.

2. Degradation of Rubber and Plastic: Diesel can make rubber and plastic parts brittle or cause discolouration over time.

3. Environmentally Friendly: Diesel is terrible for the environment, and using diesel for cleaning bikes causes poisoning of water and soil.

4. Poor Risks of Rinsing: Water with diesel remains on the bike, the remaining diesel can attract more dirt as well and damage components because of extensive durations.

5. Risk of Fire: Diesel is combustible, so poor handling may cause more risks at the time of cleaning.

 TYPES OF BIKE DIESEL WASHING SERVICE

1. Engine-Focused Diesel Wash: Clean and degrease an engine and an exhaust system, remove oil and grime buildup.

2. Chain and Sprocket Diesel Cleaning: Apply diesel cleaning to the chain and sprockets to flush out grease and dirt, and lubricate it afterwards.

3. Spot Diesel Cleaning: Use diesel in very dirty areas without covering the whole bike to avoid damage.

4. Pre-Wash Diesel Treatment: Diesel is used as a pre-wash to break down the grease before washing in the normal soap and water bike wash.

5. Diesel Degreasing: A detail degreasing service that targets areas like the engine, frame, and chain.

 POST MAINTENANCE GUIDELINES

1. Thorough Rinse: Ensure after using diesel for the wash rinse the entire bike using a full soap and water rinse for all the diesel.

2. Chain Lube: Diesel completely removes lubrication, so chain lube should be reapplied after the cleaning.

3. Protect Painted Surfaces: Wax or polish to restore the protective surface of a bike's painted surface after it has been washed in diesel.

4. Rubber and Plastic Parts: Inspect for signs of degradation or damage to rubber and plastic after the wash.

5. Dispose of Diesel Properly: Never let diesel leak into drains or soil-it shall be disposed of following the local environmental regulations.

6. Store Properly: After a diesel wash, the bike will have a possibility of leftover moisture that may cause corrosion so store it away from dampness.

7. Use Diesel Cautiously: Use diesel washing only when the bike needs deep cleaning and stick to other safer modes of cleaning for general washing purposes.

Although bike diesel washing is efficient in the removal of grease and grime, it is to be used with caution about damaging components and environmental impact. Proper care and protection then should have been done to preserve the condition of the bike afterwards.